Home > SMT Assembly News

Suggested 14 and 16 Layer Board Layouts

1. When the outer layers have GND and PWR stack ups, these boards should be used for short trace runs or fan outs only. The second layer is the signal layer for the purpose of HDI. These should run traces from fine pitch ball grid arrays. For HDI uses, a producer accesses the second layer through controlled depth drilling by utilizing a laser drill.

2. To get rid of or minimize warp-age, it is best to maintain the thickness of the laminate from the centerline of the PCB to between the layers. The laminate type and thickness must be set before doing the layout by CAD.

3. To insure a control of impedance, it is very important to analyze the stack up with the board producer for determining copper weights, prepreg and core thickness before the board is laid out using CAD.

4. Stackup layers 2 through 16 should use 1.6 mm FR 4 material. Stack ups 10 through 20 layers should use 1.8 mm FR4 material. Stackup layers 10-32 should use 2.3 mm FR4 material.

5. The most common thicknesses for printed circuit boards are:
  1. 0.8mm (0.031”) D. 1.8mm (0.070”)
  2. 1.0mm (0.040”) E. 2.3mm (0.090”)
  3. 1.6mm (0.062”) F. 3.2mm (0.125”)

Keywords:

SMT Reflow Oven, Lead free Reflow Oven, Reflow Oven Manufacturer, LED reflow oven, PCB Reflow Oven, Nitrogen Reflow Oven, Dual Rail Reflow Oven, China Reflow Oven, wave soldering machine, Dual Rail Wave Soldering Machine, Nitrogen Wave Soldering Machine, Wave Soldering Machine Manufacturer.

Flason Electronic Co.,ltd provide a full SMT assembly line solutions, including SMT Reflow OvenWave Soldering MachinePick and Place MachineSMT Stencil PrinterSMT Inspection MachineSMT Reflow OvenSMT Peripheral EquipmentSMT Assembly lineSMT Spare Parts  etc any kind SMT machines you may need, please contact us for more information: wechat whatsapp:+8613691605420, Skype: flasonsmt, Email: sales@flason-smt.com
FAQ
1) This is the first time I use this kind of machine, is it easy to operate?
There is English manual or guide video that show you how to use machine.
If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.
2) If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG, we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
3) MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you? ( Very easy and flexible !)
A. Consult us about this product on line or by e-mail.
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment.
And 100% quality check before shipping.
F.Send your order by air or by sea.
5)Why choose us ?
A. SMT Assembly Line Total Solution !
B. Life Time Techinical Support !
C. Free Online Training Installation Service !

CONTACT US

Contact: Mr Tommy

Phone: +86 13691605420

Tel: +86 -755-85225569

Email: sales@flason-smt.com

Add: No.94,Guangtian Road,Songgang Street,Bao an District Shenzhen China